Kinetically controlled metal-elastomer nanophases for environmentally resilient stretchable electronics.

Nanophase mixtures, leveraging the complementary strengths of each component, are vital for composites to overcome limitations posed by single elemental materials. Among these, metal-elastomer nanophases are particularly important, holding various practical applications for stretchable electronics. However, the methodology and understanding of nanophase mixing metals and elastomers are limited due to difficulties in blending caused by thermodynamic incompatibility. Here, we present a controlled method using kinetics to mix metal atoms with elastomeric chains on the nanoscale. We find that the chain migration flux and metal deposition rate are key factors, allowing the formation of reticular nanophases when kinetically in-phase. Moreover, we observe spontaneous structural evolution, resulting in gyrified structures akin to the human brain. The hybridized gyrified reticular nanophases exhibit strain-invariant metallic electrical conductivity up to 156% areal strain, unparalleled durability in organic solvents and aqueous environments with pH 2-13, and high mechanical robustness, a prerequisite for environmentally resilient devices.

Machine learning to identify endometrial biomarkers predictive of pregnancy success following artificial insemination in dairy cows.

The objective was to identify a set of genes whose transcript abundance is predictive of a cow's ability to become pregnant following artificial insemination (AI). Endometrial epithelial cells from the uterine body were collected for RNA sequencing using the cytobrush method from 193 first-service Holstein cows at estrus prior to AI (day 0). A group of 253 first-service cows not used for cytobrush collection were controls. There was no effect of cytobrush collection on pregnancy outcomes at day 30 or 70 or on pregnancy loss between day 30 and 70. There were 2 upregulated and 214 downregulated genes (FDR < 0.05, absolute fold change >2-fold) for cows pregnant at day 30 versus those that were not pregnant. Functional terms overrepresented in the downregulated genes included those related to immune and inflammatory responses. Machine learning for fertility biomarkers with the R package BORUTA resulted in identification of 57 biomarkers that predicted pregnancy outcome at day 30 with an average accuracy of 77%. Thus, machine learning can identify predictive biomarkers of pregnancy in endometrium with high accuracy. Moreover, sampling of endometrial epithelium using the cytobrush can help understand functional characteristics of the endometrium at AI without compromising cow fertility. Functional characteristics of the genes comprising the set of biomarkers is indicative that a major determinant of cow fertility, at least for first insemination after calving, is immune status of the uterus, which, in turn, is likely to reflect the previous history of uterine disease.

The sweetest polymer nanoparticles: opportunities ahead for glycogen in nanomedicine.

Most cells take simple sugar (α-D-glucose) and assemble it into highly dense polysaccharide nanoparticles called glycogen. This is achieved through the action of multiple coupled-enzymatic reactions, yielding the cellular store of polymerised glucose to be degraded in times of metabolic need. These nanoparticles can be readily isolated from various animal tissues and plants, and are commercially available on a large scale. Importantly, glycogen is highly water soluble, non-toxic, low-fouling, and biodegradable, making it an attractive nanoparticle for use in nanomedicine, for both diagnosing and treating disease. This concept has been pursued actively recently, with exciting results on a variety of fronts, especially for targeting specific tissues and delivering nucleic acid and peptide cargo. In this perspective, the role of glycogen in nanomedicine going forward is discussed, with opportunities highlighted of where these sugary nanoparticles fit into the problem of treating disease.

A diffusion decision model analysis of the cognitive effects of neurofeedback for ADHD.

OBJECTIVE: To examine cognitive effects of neurofeedback (NF) for attention-deficit hyperactivity disorder (ADHD) as a secondary outcome of a randomized clinical trial. METHOD: In a double-blind randomized clinical trial (NCT02251743), 133 7-10-year olds with ADHD received either 38 sessions of NF (n = 78) or control treatment (n = 55) and performed an integrated visual and auditory continuous performance test at baseline, mid- and end-treatment. We used the diffusion decision model to decompose integrated visual and auditory continuous performance test performance at each assessment into cognitive components: efficiency of integrating stimulus information (v), context sensitivity (cv), response cautiousness (a), response bias (z/a), and nondecision time for perceptual encoding and response execution (Ter). Based on prior findings, we tested whether the components known to be deficient improved with NF and explored whether other cognitive components improved using linear mixed modeling. RESULTS: Before NF, children with ADHD showed main deficits in integrating stimulus information (v), which led to less accurate and slower responses than healthy controls (p = .008). The NF group showed significantly more improvement in integrating auditory stimulus information (v) than control treatment (significant group-by-time-by-modality effect: p = .044). CONCLUSIONS: NF seems to improve v, deficient in ADHD. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Turning on hotspots: supracolloidal SERS probes made brilliant by an external activation mechanism.

We achieved external activation of local hot-spot sites in supracolloidal assembly structures. The concept was demonstrated by boosting surface-enhanced Raman scattering (SERS) efficiency by one order of magnitude through a heating-induced process. Our approach involves assembling gold nanoparticles with distinct dimensions, i.e. 16 and 80 nm, into well-defined planet-satellite-type arrangement structures using thermoresponsive (poly(N-isopropylacrylamide)) star polymer linkers. Insights into the assembly process were obtained by calculations within the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory framework. We observe one order of magnitude increase in SERS enhancement by a heating-induced volume-phase transition. This magnification aligns with simulations run using the finite-difference time-domain (FDTD) method. The implications of this adaptive supracolloidal concept are twofold: Firstly, our approach bypasses limitations of existing systems that are associated with the limited accessibility of electromagnetic hot-spot sites in strongly coupled, static assemblies of plasmonic nanoparticles, by providing the capability of dynamic hot-spot re-configuration. Second, these externally activated probes offer promising opportunities for the development of messenger materials and associated sensing strategies.

Identification of quantitative trait loci and associated candidate genes for pregnancy success in Angus-Brahman crossbred heifers.

BACKGROUND: In beef cattle, more than 50% of the energy input to produce a unit of beef is consumed by the female that produced the calf. Development of genomic tools to identify females with high genetic merit for reproductive function could increase the profitability and sustainability of beef production. RESULTS: Genome-wide association studies (GWAS) were performed using a single-step genomic best linear unbiased prediction approach on pregnancy outcome traits from a population of Angus-Brahman crossbred heifers. Furthermore, a validation GWAS was performed using data from another farm. Heifers were genotyped with the Bovine GGP F250 array that contains 221,077 SNPs. In the discovery population, heifers were bred in winter breeding seasons involving a single round of timed artificial insemination (AI) followed by natural mating for 3 months. Two phenotypes were analyzed: pregnancy outcome to first-service AI (PAI; n = 1,481) and pregnancy status at the end of the breeding season (PEBS; n = 1,725). The heritability was estimated as 0.149 and 0.122 for PAI and PEBS, respectively. In the PAI model, one quantitative trait locus (QTL), located between 52.3 and 52.5 Mb on BTA7, explained about 3% of the genetic variation, in a region containing a cluster of γ-protocadherin genes and SLC25A2. Other QTLs explaining between 0.5% and 1% of the genetic variation were found on BTA12 and 25. In the PEBS model, a large QTL on BTA7 was synonymous with the QTL for PAI, with minor QTLs located on BTA5, 9, 10, 11, 19, and 20. The validation population for pregnancy status at the end of the breeding season were Angus-Brahman crossbred heifers bred by natural mating. In concordance with the discovery population, the large QTL on BTA7 and QTLs on BTA10 and 12 were identified. CONCLUSIONS: In summary, QTLs and candidate SNPs identified were associated with pregnancy outcomes in beef heifers, including a large QTL associated with a group of protocadherin genes. Confirmation of these associations with larger populations could lead to the development of genomic predictions of reproductive function in beef cattle. Moreover, additional research is warranted to study the function of candidate genes associated with QTLs.

Integrated FRET Polymers Spatially Reveal Micro- to Nanostructure and Irregularities in Electrospun Microfibers.

A spatial view of macroscopic polymer material properties, in terms of nanostructure and irregularities, can help to better understand engineering processes such as when materials may fail. However, bridging the gap between the molecular-scale arrangement of polymer chains and the spatially resolved macroscopic properties of a material poses numerous difficulties. Herein, an integrated messenger material that can report on the material micro- to nanostructure and its processes is introduced. It is based on polymer chains labeled with fluorescent dyes that feature Förster resonance energy transfer (FRET) dependent on chain conformation and concentration within a host polymer material. These FRET materials are integrated within electrospun polystyrene microfibers, and the FRET is analyzed by confocal laser scanning microscopy (CLSM). Importantly, the use of CLSM allows a spatial view of material nanostructure and irregularities within the microfibers, where changes in FRET are significant when differences in fiber geometries and regularities exist. Furthermore, changes in FRET observed in damaged regions of the fibers indicate changes in polymer conformation and/or concentration as the material changes during compression. The system promises high utility for applications where nano-to-macro communication is needed for a better understanding of material processes.

Resolving the Globisporangium ultimum (Pythium ultimum) species complex.

The Globisporangium ultimum (formerly Pythium ultimum) species complex was previously composed of two morphological varieties: var. ultimum and var. sporangiiferum. Prior attempts to resolve this morphology-based species complex using molecular techniques have been inconclusive or conflicting. The increased availability of sequenced genomes and isolates identified as G. ultimum var. ultimum and var. sporangiiferum has allowed us to examine these relationships at a higher resolution and with a broader scope than previously possible. Using comparative genomics, we identified highly variable gene regions and designed primers for four new protein-coding genes for phylogenetics. These were then used alongside three known markers to generate a nuclear multigene genealogy of the species complex. From a collection of 163 isolates belonging to the target taxa, a subset of 29 was chosen to be included in this study (verified with nuclear rDNA internal transcribed spacer 1 [ITS1] and mitochondrial cytochrome c oxidase subunit 1 [cox1] sequences). Seventeen isolates of var. ultimum were selected to be representative of variations in genotype, morphology, and geographic collection location. The 12 isolates of var. sporangiiferum included all available specimens identified either morphologically (in previous studies) or through sequence similarity with ITS1 and cox1. Based on the fulfillment of reciprocal monophyly and observed genealogical concordance under the genealogical concordance phylogenetic species recognition, we determined that the Globisporangium ultimum species complex is composed of four genetically distinct species: Globisporangium ultimum, Globisporangium sporangiiferum, Globisporangium solveigiae, and Globisporangium bothae.

Transcriptomic profiling of the bovine endosalpinx and endometrium to identify putative embryokines.

The objectives of the present study were to characterize the expression of genes encoding for cell signaling ligands in the bovine endosalpinx and endometrium and analyze spatial changes in gene expression. RNA sequencing was performed for the endosalpinx from the ampulla of the oviduct and endometrium from the upper and middle uterine horn and uterine body at day 2 after ovulation from ipsilateral and contralateral sides relative to the ovulatory ovary. Of the 17,827 unique mRNA transcripts mapped, 2,072 were affected by cranial-caudal position in the reproductive tract and 818 were affected by side (false discovery rate < 0.05). There were 334 genes encoding for cell signaling ligands, with 128 genes having greater than two transcripts per million on average. A total of 81 cell signaling ligand genes were affected by position and 24 were affected by side. A data set of the transcriptome of two to four cell embryos was used to identify cell signaling ligand genes that were highly expressed in the ampulla for which there was high expression of the receptor in the embryo. The most expressed ligand-receptor pairs were PSAP/SORT1, MIF/CXCR4, GPI/AMFR, and KITLG/KIT. These cell signaling ligands, as well as others whose gene is expressed in the endosalpinx and endometrium, may influence early embryonic development. Spatial changes throughout the reproductive tract highlight the distinctive expression profile of the oviduct versus the endometrium, including a set of the identified genes encoding for cell signaling ligands, and highlight the local influence of the ovary. The results also show the continuity of expression for large numbers of genes in the reproductive tract.NEW & NOTEWORTHY Examination of the transcriptome of the endosalpinx and endometrium revealed the degree to which gene expression in the reproductive tract varies spatially. The expression of genes encoding cell signaling molecules that could potentially regulate embryonic development was also identified.

Is Hand Therapy Associated With a Delay in Surgical Treatment in Thumb Carpometacarpal Arthritis?

PURPOSE: Thumb carpometacarpal (CMC) osteoarthritis (OA) causes functional disability and an increased health care burden in the aging population. The role of therapy in thumb CMC OA has been minimally analyzed in the literature. We hypothesized that patients treated with therapy for thumb CMC OA would demonstrate reduced rates of surgery for this diagnosis. METHODS: We queried a national insurance dataset for all patients with an International Classification of Diseases, Ninth Revision, or International Statistical Classification of Diseases, Tenth Revision, code for thumb CMC OA, with a minimum of 2 years of follow-up. A 2:1 propensity-matched cohort of patients with CMC OA who did not receive therapy versus a therapy cohort was created, with a minimum of two sessions of hand therapy for inclusion. The primary outcome was the rate of thumb CMC OA surgery occurring within 2 years of diagnosis; time to surgery and use of thumb CMC injections were secondary outcomes. Multivariable logistic regression analysis was used to identify the risk factors for undergoing surgical treatment. RESULTS: After matching, the therapy cohort comprised 14,548 patients, with a matched group of 28,930 patients who did not undergo therapy. In the overall sample, the rate of surgery within 2 years was 22.5%. Two-year surgical treatment rates were significantly higher for those who did not undergo therapy when compared with those who did (29.3% vs 13.1%). Patients treated with therapy had a significantly longer time to surgery, with no difference in the rate of surgery after one year. In multivariable regression of all included variables, lack of therapy intervention had the highest odds of surgery for thumb CMC OA (odds ratio 4.3). CONCLUSIONS: We present the findings of a large insurance database evaluating the association of therapy with rates of surgical treatment for thumb CMC arthritis. On average, those treated with therapy had longer times to surgery, and the 2-year surgery rates for patients diagnosed with thumb CMC arthritis were significantly higher in those who did not undergo therapy treatment. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognostic II.

Species diversity and molecular characterization of Alternaria section Alternaria isolates collected mainly from cereal crops in Canada.

Alternaria is often one on the most abundant fungal genera recovered from a wide array of plant hosts and environmental substrates. Many species within the sub-generic Alternaria section Alternaria are common plant pathogens that cause pre-harvest losses due to reduced productivity and post-harvest losses due to spoilage and contamination with mycotoxins. As certain species of Alternaria may have distinct mycotoxin profiles, and very broad host ranges, understanding the distribution of species by geography and host is critical for disease prediction, toxicological risk assessment, and guiding regulatory decisions. In two previous reports, we performed phylogenomic analyses to identify highly informative molecular markers for Alternaria section Alternaria, and validated their diagnostic ability. Here, we perform molecular characterization of 558 section Alternaria strains, collected from 64 host genera in 12 countries, using two of these section-specific loci (ASA-10 and ASA-19) along with the RNA polymerase II second largest subunit (rpb2) gene. The majority of strains (57.4%) originated from various cereal crops in Canada, which formed the main focus of our study. Phylogenetic analyses were used to classify strains into section Alternaria species/lineages, demonstrating that the most common species on Canadian cereal crops are Alternaria alternata and A. arborescens. Further population genetic analyses were consistent with A. alternata being a widely distributed species with relatively low levels of geographic isolation (i.e., Canadian isolates did not form distinct clades when compared to other regions). Our expanded sampling of A. arborescens has greatly increased the known diversity of this group, with A. arborescens isolates forming at least three distinct phylogenetic lineages. Proportionally, A. arborescens is more prevalent in Eastern Canada than in Western Canada. Sequence analyses, putative hybrids, and mating-type distributions provided some evidence for recombination events, both within and between species. There was little evidence for associations between hosts and genetic haplotypes of A. alternata or A. arborescens.

Critical analysis of adhesion work measurements from AFM-based techniques for soft contact.

HYPOTHESIS: The work of adhesion is a thermodynamic quantity that is frequently measured by atomic force microscopy (AFM). Determination of the work of adhesion requires quasi-equilibrium measurements, where we address the question of to what extent atomic force microscopy qualifies for quasi-equilibrium measurements. EXPERIMENT: To measure the work of adhesion, we combined soft colloidal probe AFM (SCP AFM) with reflection interference contrast microscopy (RICM). This allowed us to extract the work of adhesion either from the pull-off force or from the contact radius. With these methods, we investigated the adhesion behavior of poly(N-isopropylacrylamide) (PNIPAM) polymer brushes in the swollen and solvent-induced collapsed state by systematically analyzing contact radii and adhesive forces. FINDINGS: In the swollen state, the adhesion to the PNIPAM brush was fivefold larger and exhibited significant time dependencies when measured with SCP AFM. A strong rate dependence of the pull-off force method was indicative of a non-equilibrium process. In order to reliably determine the equilibrium work of adhesion, the contact radius method was found to be the better because it is not rate dependent. Our work highlights the important benefits of using optical measurements to determine the contact radius when deriving the works of adhesion between colloidal probes and polymer brush surfaces.

An Engineered Nanosugar Enables Rapid and Sustained Glucose-Responsive Insulin Delivery in Diabetic Mice.

Glucose-responsive insulin-delivery platforms that are sensitive to dynamic glucose concentration fluctuations and provide both rapid and prolonged insulin release have great potential to control hyperglycemia and avoid hypoglycemia diabetes. Here, biodegradable and charge-switchable phytoglycogen nanoparticles capable of glucose-stimulated insulin release are engineered. The nanoparticles are "nanosugars" bearing glucose-sensitive phenylboronic acid groups and amine moieties that allow effective complexation with insulin (≈95% loading capacity) to form nanocomplexes. A single subcutaneous injection of nanocomplexes shows a rapid and efficient response to a glucose challenge in two distinct diabetic mouse models, resulting in optimal blood glucose levels (below 200 mg dL-1 ) for up to 13 h. The morphology of the nanocomplexes is found to be key to controlling rapid and extended glucose-regulated insulin delivery in vivo. These studies reveal that the injected nanocomplexes enabled efficient insulin release in the mouse, with optimal bioavailability, pharmacokinetics, and safety profiles. These results highlight a promising strategy for the development of a glucose-responsive insulin delivery system based on a natural and biodegradable nanosugar.

Influence of the Atmosphere on the Wettability of Polymer Brushes.

Polymer brushes, i.e., end-tethered polymer chains on substrates, are sensitive to adaptation, e.g., swelling, adsorption, and reorientation of the surface molecules. This adaptation can originate from a contacting liquid or atmosphere for partially wetted substrates. The macroscopic contact angle of the aqueous drop can depend on both adaptation mechanisms. We analyze how the atmosphere around an aqueous droplet determines the resulting contact angle of the wetting droplet on polymer brush surfaces. Poly(N-isopropylacrylamide) (PNiPAAm)-based brushes are used due to their exceptional sensitivity to solvation and liquid mixture composition. We develop a method that reliably measures wetting properties when the drop and the surrounding atmosphere are not in equilibrium, e.g., when evaporation and condensation tend to contaminate the liquid of the drop and the atmosphere. For this purpose, we use a coaxial needle in the droplet, which continuously exchanges the wetting liquid, and in addition, we constantly exchange the almost saturated atmosphere. Depending on the wetting history, PNiPAAm can be prepared in two states, state A with a large water contact angle (∼65°) and state B with a small water contact angle (∼25°). With the coaxial needle, we can demonstrate that the water contact angle of a sample in state B significantly increases by ∼30° when a water-free atmosphere is almost saturated with ethanol, compared to an ethanol-free atmosphere at 50% relative humidity. For a sample in state A, the relative humidity has little influence on the water contact angle.

Comprehensive ultrasound imaging of right ventricular remodeling under surgically induced pressure overload in mice.

This study reports a new methodology for right heart imaging by ultrasound in mice under right ventricular (RV) pressure overload. Pulmonary artery constriction (PAC) or sham surgeries were performed on C57BL/6 male mice at 8 wk of age. Ultrasound imaging was conducted at 2, 4, and 8 wk postsurgery using both classical and advanced ultrasound imaging modalities including electrocardiogram (ECG)-based kilohertz visualization, anatomical M-mode, and strain imaging. Based on pulsed Doppler, the PAC group demonstrated dramatically enhanced pressure gradient in the main pulmonary artery (MPA) as compared with the sham group. By the application of advanced imaging modalities in novel short-axis views of the ventricles, the PAC group demonstrated increased thickness of RV free wall, enlarged RV chamber, and reduced RV fractional shortening compared with the sham group. The PAC group also showed prolonged RV contraction, asynchronous interplay between RV and left ventricle (LV), and passive leftward motion of the interventricular septum (IVS) at early diastole. Consequently, the PAC group exhibited prolongation of LV isovolumic relaxation time, without change in LV wall thickness or systolic function. Significant correlations were found between the maximal pressure gradient in MPA measured by Doppler and the RV systolic pressure by catheterization, as well as the morphological and functional parameters of RV by ultrasound.NEW & NOTEWORTHY The established protocol overcomes the challenges in right heart imaging in mice, thoroughly elucidating the changes of RV, the dynamics of IVS, and the impact on LV and provides new insights into the pathophysiological mechanism of RV remodeling.

Isolated ballistic femoral condyle fractures: a case series of eighteen patients.

PURPOSE: Ballistic fractures of the femoral condyles are rare injuries with limited literature to help guide treatment. The purpose of this study is to report on the presentation, management, and outcomes for patients with isolated ballistic condylar fractures. METHODS: Eighteen patients between ages 16 and 65 with low-energy ballistic injuries isolated to the femoral condyles (OTA 33B) were included, 15 with CT imaging. Clinical records and imaging were reviewed, as well as treatment strategy. Fractures were classified by AO/OTA classification. Outcome and follow-up data were gathered at outpatient appointments and telephone calls. RESULTS: Of the 18 patients, 78% were treated operatively (61% with open reduction and internal fixation, 17% with removal of foreign body alone). There were two instances of traumatic vascular injury and no neurologic injuries. Furthermore, there were no identified infections. Only 58% of the patients had follow-up for more than 6 weeks with average KOOS Jr. Score of 50, and average VAS pain score of 5.2. CONCLUSIONS: Ballistic femoral condyle fractures are rare Orthopaedic injuries seen in relatively high frequency at our institution. Most (78%) were treated operatively and with few complications. These fractures are not easily classified according to common classification schemes and may benefit from more rigorous study to guide treatment and anticipate outcomes.

Surgical Outcomes, Trends, and Risk Factors of Distal Triceps Repairs.

BACKGROUND: Distal triceps ruptures are rare, and complete ruptures are commonly treated with surgery. Studies of patients in small cohorts with distal triceps tear have reported outcomes and risk factors; however, large-scale data are scant. This study seeks to determine current trends, outcomes, and risk factors of distal triceps tears. METHODS: Within a large insurance claims database, distal triceps repair patients were identified through Current Procedural Terminology coding with concomitant distal triceps International Classification of Diseases, 9th Revision/10th Revision diagnosis codes and 1-year active status before and after surgery. Demographics, total costs, 90-day complications, and revision rates within 1 year of index surgery were analyzed. Logistic regression was performed for revision and complication rates using sex, age, and comorbidities (anabolic steroid use, diabetes, ischemic heart disease, tobacco use, rheumatoid arthritis, and chronic kidney disease). RESULTS: A total of 8143 patients were included in the cohort. Male patients and patients aged 40 to 59 years comprised most of the study population. The postoperative complication rate was 5.8%, and the 1-year revision rate was 2.6%. Male sex, age >60 years, ischemic heart disease, rheumatoid arthritis, and chronic kidney disease were statistically significant risk factors for higher 90-day complication rates. Anabolic steroid use significantly increased the risk of surgical revision. CONCLUSIONS: Distal triceps repairs in this large cohort study occur most frequently in men aged 40 to 59 years. Complications are generally low, with age >60 years, male sex, ischemic heart disease, rheumatoid arthritis, and chronic kidney disease as risk factors for 90-day complications and prior anabolic steroid use as a risk factor for 1-year revision surgery. This information can help to improve education and expectations of this procedure.

Generating accurate 3D gaze vectors using synchronized eye tracking and motion capture.

Assessing gaze behavior during real-world tasks is difficult; dynamic bodies moving through dynamic worlds make gaze analysis difficult. Current approaches involve laborious coding of pupil positions. In settings where motion capture and mobile eye tracking are used concurrently in naturalistic tasks, it is critical that data collection be simple, efficient, and systematic. One solution is to combine eye tracking with motion capture to generate 3D gaze vectors. When combined with tracked or known object locations, 3D gaze vector generation can be automated. Here we use combined eye and motion capture and explore how linear regression models generate accurate 3D gaze vectors. We compare spatial accuracy of models derived from four short calibration routines across three pupil data inputs: the efficacy of calibration routines was assessed, a validation task requiring short fixations on task-relevant locations, and a naturalistic object interaction task to bridge the gap between laboratory and "in the wild" studies. Further, we generated and compared models using spherical and Cartesian coordinate systems and monocular (left or right) or binocular data. All calibration routines performed similarly, with the best performance (i.e., sub-centimeter errors) coming from the naturalistic task trials when the participant is looking at an object in front of them. We found that spherical coordinate systems generate the most accurate gaze vectors with no differences in accuracy when using monocular or binocular data. Overall, we recommend 1-min calibration routines using binocular pupil data combined with a spherical world coordinate system to produce the highest-quality gaze vectors.